-
Wachs Utility HPU-18 18HP Hydraulic Power Unit (HPU) is a CE Compliant, gas engine driven hydraulic unit cart mounted. Powered by an 18 HP (13.25 kW) Briggs & Stratton V-Twin engine with electric start, it is designed to power both HTMA Class I & II tools. A selector valve on the control panel sets the pump to deliver either 8 GPM (30 LPM) @ 2,000 PSI (140 bar) or 5 GPM (20 LPM) @ 2,000 PSI (140bar). Wachs portable hydraulic power units are the ideal choice for smooth, reliable hydraulic power, in the shop or in the field. Hydraulic power units (HPUs) pack more power in less space than any other power source, and because the supply is completely sealed they’re the best choice for partial immersion, sandy, dusty and other difficult environments. FEATURES
- Fuel Tank capacity: 5.5 gallon (20 l). Minimum grade 85 octane
- One 5 gpm (19 lpm) Circuit or One 8 gpm (30 lpm) Circuit
- Hydraulic Reservoir Capacity 3 gallon (11 l)
- HTMA/EHTMA Category Type 1 and 2
- Max Pressure 2000 psi (138 bar)
- Auto idle feature-lower fuel consumption & less noise
- Tool circuit lockout during engine start-up - safety feature
- Quartz hour meter on control panel-records engine run time
- Lift and latch handle with fold up side handles
- 35 Ah sealed, non spillable, no maintenance battery located in covered compartment
- Electric start engine has pressure lubrication system, low engine oil shutdown & spin-on oil filter
- In-tank hydraulic filter with dipstick & easy access filter replacement
-
The Wachs HPU-750 is designed to supply hydraulic power to the ERV-750 and TM-7 valve operators, or any HTMA Class II hydraulic tool. Equipped with a Briggs & Stratton 16 HP Vanguard V-Twin OHV gasoline engine driven hydraulic power supply with dual auxiliary circuits, electric start and electric fan driven oil cooler. Rated for 8GPM @ 1800 PSI (30 LPM @ 124 BAR). The hydraulic system is self-contained with 10 gallon (38L) reservoir, filtration and relief valve. Ships without fluids, Part #79-405-00
-
The Wachs 45 pound hydraulic breaker is rugged, lightweight, and powerful. Designed for use with an HTMA class 2 hydraulic circuit, it is perfect for curb and sidewalk demolition and asphalt cutting. The foot design absorbs and controls tool-bit bounce, greatly reducing operator fatigue. Accessories:
- 08-405-00 Trailer Mount for Breaker
- 08-410-01 5in x 11in Asphalt Cutter
- 08-410-02 14in Moil Point
- 08-410-03 3in x 14in Chisel
-
The Wachs Hydraulic Flow Adapter allows for smooth, quiet operation of any Diamond Wire Guillotine® Saw powered from other hydraulic equipment on the jobsite such as a skid loader or backhoe. Use with high-capacity power supplies up to 20 GPM (76 lpm) and up to 3,000 psi (172.5 bar). NOTE: 20 GPM rating is based on unrestricted tank return line; reducing or the use of quick disconnects on the inlet that reduces flow rating may risk damage to motor seals.
-
Wachs Hydro-Vac Skid, Diesel includes all components pre-assembled to a steel "skid" that can be quickly bolted down to your flatbed truck. This unit is powered by a Tier 4F compliant, Kubota 1.1L, I-3 4-stroke, liquid cooled, IDI diesel engine that provides ample power for all contained functions. Built off Wachs Standard Builder Skid platform, it can be configured just the way you want it, built exactly to fit your needs and budget. Its future upgrade path means you can order what you need today, knowing that you can upgrade it tomorrow. The Standard Builder allows for an ala carte selection of our standard valve maintenance modules to be installed onto our heavy duty steel skid. The Builder platform’s upgrade path offers maximum versatility – for example, configure a Hydro-Vac trailer with hydraulics today, add a ERV-750 Valve Exerciser later. Wachs skid systems pre-install and pre-wire all the system components to a metal skid, ready to run, which only requires a few bolts to mount it to the truck flatbed, eliminating much of the labor expense. The skid that the equipment mounts to consists of 3” tall formed and welded frame with integrated 8” full length fork slot tubes. A step up in power, capacity and size from the smaller Trav-L-Vac 300, the Hydro-Vac Skid includes a powerful vacuum that generates 500 CFM at 11in Hg. It includes a large, 250 gallon spoils tank that features our exclusive hydraulic powered slide, tilt, and dump system with power latching door, here in a rear dump configuration. This power spoils tank features a twin cylinder, electric over hydraulic dump system that incorporates a slide and tilt system that moves the tank out before tilting to clear for dumping, then lifts to 55 degrees to discharge debris. Also driven from the common power train is a 2.5 gpm @ 3000 psi pressure washer system with 3 gallon anti-freeze tank and 95 gallon vertical water tank. Includes 2-1/2in, 1-1/4in & 7/8” suction wands, short & long wash-down guns, 20ft suction hose and 50ft retractable hose reel. Note a valve exerciser is not included with the Hydro-Vac Skid, it features vacuum, power spoils tank and power wash units only. Valve exercisers can be ordered separately, or refer to our Standard LX Skid, Diesel systems that includes the ERV-750 exerciser for fuller valve maintenance capabilities.
-
Wachs Hydro-Vac Skid, Gas includes all components pre-assembled to a steel "skid" that can be quickly bolted down to your flatbed truck. This unit is powered by a 27 HP gasoline powered Kohler overhead cam air cooled engine provides ample power for all contained functions. Built off Wachs Standard Builder Skid platform, it can be configured just the way you want it, built exactly to fit your needs and budget. Its future upgrade path means you can order what you need today, knowing that you can upgrade it tomorrow. The Standard Builder allows for an ala carte selection of our standard valve maintenance modules to be installed onto our heavy duty steel skid. The Builder platform’s upgrade path offers maximum versatility – for example, configure a Hydro-Vac trailer with hydraulics today, add a ERV-750 Valve Exerciser later. Wachs skid systems pre-install and pre-wire all the system components to a metal skid, ready to run, which only requires a few bolts to mount it to the truck flatbed, eliminating much of the labor expense. The skid that the equipment mounts to consists of 3” tall formed and welded frame with integrated 8” full length fork slot tubes. A positive displacement blower provides 500 CFM-11in Hg vacuum, with spoils contained by a 250 gallon tank utilizing our exclusive hydraulic side and dump system and latching rear door. Also driven from the common power train is a 2.5 gpm @ 3000 psi pressure washer system with 3 gallon anti-freeze tank and 80 gallon vertical water tank. Includes 2-1/2in, 1-1/4in & 7/8” suction wands, short & long wash-down guns, 20ft suction hose and 50ft retractable hose reel. Note a valve exerciser is not included with this unit. Valve exercisers can be ordered separately, or refer to our Standard LX Valve Maintenance Skid, Gas, that includes the ERV-750 exerciser.
-
Wachs Hydro-Vac Trailer is a safe, non-destructive and cost-effective machine for precise utility excavation that requires less backfill and restoration. The Hydro-Vac trailer prevents underground damage, while offering a more accurate way to excavate soil and locate underground utilities. Powered by a long lasting Kubota 4 stoke diesel, the trailer comes with a Pintle hook for connection to a medium duty pickup or larger truck. Built off Wachs Standard Builder Trailer platform, it can be configured just the way you want it, built exactly to fit your needs and budget. Its future upgrade path means you can order what you need today, knowing that you can upgrade the trailer tomorrow. The Standard Builder allows for an ala carte selection of our standard valve maintenance modules to be installed onto our heavy duty trailer. The Builder platform’s upgrade path offers maximum versatility – for example, configure a Hydro-Vac trailer with hydraulics today, add a ERV-750 Valve Exerciser later. A step up in power, capacity and size from the smaller Trav-L-Vac 300, the Hydro-Vac trailer includes a powerful vacuum that generates 500 CFM at 11in Hg. It includes a large, 250 gallon spoils tank that features our exclusive hydraulic powered slide, tilt, and dump system with power latching door, here in a rear dump configuration. This power spoils tank features a twin cylinder, electric over hydraulic dump system that incorporates a slide and tilt system that moves the tank out before tilting to clear for dumping, then lifts to 55 degrees to discharge debris. Also driven from the common power train is a 2.5 gpm @ 3000 psi pressure washer system with 3 gallon anti-freeze tank and 95 gallon vertical water tank. Includes 2-1/2in, 1-1/4in & 7/8” suction wands, short & long wash-down guns, 20ft suction hose and 50ft retractable hose reel. Note a valve exerciser is not included with the Hydro-Vac trailer, it features vacuum, power spoils tank and power wash units only. Valve exercisers can be ordered separately, or refer to our diesel powered Standard LX Trailer that includes the ERV-750 exerciser for fuller valve maintenance capabilities.
-
Wachs Hydro-Vac Trailer is a safe, non-destructive and cost-effective machine for precise utility excavation that requires less backfill and restoration. The Hydro-Vac trailer prevents underground damage, while offering a more accurate way to excavate soil and locate underground utilities. Powered by a powerful Kohler 27 HP gasoline engine, the trailer comes with a Pintle hook for connection to a medium duty pickup or larger truck. Built off Wachs Standard Builder Trailer platform, it can be configured just the way you want it, built exactly to fit your needs and budget. Its future upgrade path means you can order what you need today, knowing that you can upgrade the trailer tomorrow. The Standard Builder allows for an ala carte selection of our standard valve maintenance modules to be installed onto our heavy duty trailer. The Builder platform’s upgrade path offers maximum versatility – for example, configure a Hydro-Vac trailer with hydraulics today, add a ERV-750 Valve Exerciser later. A step up in power, capacity and size from the smaller Trav-L-Vac 300, the Hydro-Vac trailer includes a powerful vacuum that generates 500 CFM at 11in Hg. It includes a large, 250 gallon spoils tank that features our exclusive hydraulic powered slide, tilt, and dump system with power latching door, here in a rear dump configuration. This power spoils tank features a twin cylinder, electric over hydraulic dump system that incorporates a slide and tilt system that moves the tank out before tilting to clear for dumping, then lifts to 55 degrees to discharge debris. Also driven from the common power train is a 2.5 gpm @ 3000 psi pressure washer system with 3 gallon anti-freeze tank and 95 gallon vertical water tank. Includes 2-1/2in, 1-1/4in & 7/8” suction wands, short & long wash-down guns, 20ft suction hose and 50ft retractable hose reel. Note a valve exerciser is not included with the Hydro-Vac trailer, it features vacuum, power spoils tank and power wash units only. Valve exercisers can be ordered separately, or refer to our gas powered Standard LX Trailer that includes the ERV-750 exerciser for fuller valve maintenance capabilities.
-
Industry Leading Compaction
The design of this heavy-duty refuse truck sets the bar, putting it at the top of the industry's food chain. The New Way® King Cobra™ Rear Loader is the unequivocal leader with an approximate 1,100 to 1,300 lbs per yd³ compaction rate and superior rear-loading capabilities. Built to take on a lot of work and not a lot of maintenance, the King Cobra rear loader offers many of the standard features of the other New Way® rear loaders. Curbside hydraulic access, side-body automatic tailgate locks, a rear-view camera and two-year cylinder warranty are just a few of the many standard options. The King Cobra can also be customized to meet the needs of your individual operation. Combine all of this with the fact that the King Cobra has the lowest cost of operation of any comparable body size and one of the lowest warranty claims of any garbage truck body in the industry, and you've got a refuse truck that charms the most demanding of routes.