-
As the industry leader in truck and trailer valve maintenance systems, Wachs Utility Products offers a wide range of equipment designed to perform recommended or mandated procedures. Wachs products can help track your valuable water infrastructure and keep it operating at peak efficiency. The pinnacle in trailer mounted valve maintenance systems is Wachs Grand LX Trailer. Wachs Grand LX trailer includes two valve turning machines, our class leading ERV-750 extended reach operator and the newly upgraded TM-7 HD Plus, developing 2,500 ft/lbs of torque for larger or stubborn valves. It’s built on an extra heavy duty trailer with large section, fully boxed 6” frame rails, heavy duty fender, LED lighting, and a higher capacity 8400 lbs. rated axle with 12” electric brakes. The TM-7 HD Plus valve exerciser moves to the ideal nine o’clock mounting location in the driver’s line of sight, and allows for better torque management along the longitudinal axis of the tailer. Wachs Grand LX supports our industry exclusive VITALS software that uses “No Assumptions” logic in its programming. This class leading software, developed over the last three decades, has one goal in mind - to eliminate misdirection and over-torquing of valves during operation to prevent damaging or breaking them. Comprised of both mobile and desktop modules, VITALS allows you to set torque limits and record infrastructure details including location, valve-operating direction, and torque applied. -
Wachs Hydro-Vac Trailer is a safe, non-destructive and cost-effective machine for precise utility excavation that requires less backfill and restoration. The Hydro-Vac trailer prevents underground damage, while offering a more accurate way to excavate soil and locate underground utilities. Powered by a powerful Kohler 27 HP gasoline engine, the trailer comes with a Pintle hook for connection to a medium duty pickup or larger truck. Built off Wachs Standard Builder Trailer platform, it can be configured just the way you want it, built exactly to fit your needs and budget. Its future upgrade path means you can order what you need today, knowing that you can upgrade the trailer tomorrow. The Standard Builder allows for an ala carte selection of our standard valve maintenance modules to be installed onto our heavy duty trailer. The Builder platform’s upgrade path offers maximum versatility – for example, configure a Hydro-Vac trailer with hydraulics today, add a ERV-750 Valve Exerciser later. A step up in power, capacity and size from the smaller Trav-L-Vac 300, the Hydro-Vac trailer includes a powerful vacuum that generates 500 CFM at 11in Hg. It includes a large, 250 gallon spoils tank that features our exclusive hydraulic powered slide, tilt, and dump system with power latching door, here in a rear dump configuration. This power spoils tank features a twin cylinder, electric over hydraulic dump system that incorporates a slide and tilt system that moves the tank out before tilting to clear for dumping, then lifts to 55 degrees to discharge debris. Also driven from the common power train is a 2.5 gpm @ 3000 psi pressure washer system with 3 gallon anti-freeze tank and 95 gallon vertical water tank. Includes 2-1/2in, 1-1/4in & 7/8” suction wands, short & long wash-down guns, 20ft suction hose and 50ft retractable hose reel. Note a valve exerciser is not included with the Hydro-Vac trailer, it features vacuum, power spoils tank and power wash units only. Valve exercisers can be ordered separately, or refer to our gas powered Standard LX Trailer that includes the ERV-750 exerciser for fuller valve maintenance capabilities. -
Some water municipality suppliers do a great job with software. Some manufacturers do a good job with hardware and equipment. Wachs Utility Products does a great job with both, offering our VITALS software on many of our bestselling trailer, skid, and truck-mount valve maintenance systems, utilizing a powerful handheld controller equipped with our industry unique VITALS. With the newest versions of VITALS running on our TC-1900 ruggedized tablets and Microsoft Windows 10, it brings the power of your desktop with you to the jobsite. VITALS allows the user to control our equipment remotely, while giving you “vital” asset information in the palm of your hand, such as valve location, type, size, turns, direction, and more that can be recorded and later transferred back to your desktop. Vitals Software is comprised of two modules, Vitals Mobile and Vitals Desktop. Here’s how it works: Wachs VITALS equipped machines contain the necessary motors and sensors, VITALS software contains the operating and recordability instructions, and our TC-100 tabletcontroller provides the microprocessor brains and memory. VITALS combined with our customized controllers offer users the most precise control of valve operation ever invented. Digital torque and turn displays provide clear insight into a valve’s condition, while the electronic torque sensor records the torque chart. Adjustable torque control limits include indicators that signal when preset limits are reached, and trigger auto shut down or auto reverse to prevent valve damage. Wachs TC-100 controller gives you the option to control the equipment wired or wireless via Bluetooth®. It helps keep your crew curbside, out of traffic where accidents can and do occur. Vitals gives you the ability to safely and remotely exercise valves, capture the data, and transfer it to your desktop. As the industry leader in valve exercising systems for decades, we can still say nobody else has anything like it! -
Do you need to replace a valve nut? Wachs Valve Nut Rx system is designed to save time and money by replacing rounded or missing operating valve nuts with new, long-lasting stainless steel replacement nuts, rather than replacing the valve itself. In case of an emergency such as a valve main break, closing the valve is critical in reducing water loss and performing urgently needed repairs. Wachs Valve Nut RX is the ideal solution to avoid customer service shutdowns and tearing up streets to dig up inoperable valves. Valve Nut Rx is Designed To:- Replace a rounded, corroded, or inoperable operator nut.
- Replace a missing operator nut.
- Replace corroded hardware securing the nut.
-
Wachs Utility Products Standard LX Skid ranks among our bestselling products, excelling at all the functions typically associated with a municipality or water district self-performing a valve maintenance program. It brings the same benefits as our Standard LX trailer to your organization in a different platform, with all components preinstalled and prewired to a steel skid, ready to simply bolt down to your flatbed truck. Wachs Standard LX skid includes our class leading ERV-750 extended reach operator with a reach of 13 feet (3.96 meters) and offering a powerful 750 ft/lbs. of torque. This is the industry “standard” for a completely upgradeable, versatile platform designed to transport all the valve maintenance and vacuum tools needed in the field. Built to withstand the rigors of years of service, it’s the perfect solution for municipalities or contractors looking for a rugged, long lasting self-contained system. Wachs Standard LX skid supports our industry exclusive VITALS software that uses “No Assumptions” logic in its programming. This class leading software, developed over the last three decades, has one goal in mind - to eliminate misdirection and over-torquing of valves during operation to prevent damaging or breaking them. Comprised of both mobile and desktop modules, VITALS allows you to set torque limits and record infrastructure details including location, valve-operating direction, and torque applied. Wachs Standard LX Skid VMS, Gas comes complete with a wireless handheld controller with datalogger, and is powered by a powerful Kohler 27 HP gasoline engine. Standard equipment includes a powerful 500 CFM-11in Hg vacuum, a 250 gal spoils tank utilizing Wachs exclusive hydraulic slide, tilt & rear discharge, and a power latching rear door. Also standard is a 2.5 GPM@3000 psi pressure washer system with an 80 gallon water tank, and a HPU (Hydraulic Power Unit) with a HTMA Class II circuit, 10 gal reservoir, and a fan cooled heat exchanger, producing up to 8 gpm @ 2000 psi. Loaded with storage and accessories, Standard LX Skid includes the tools required for sophisticated valve maintenance programs. No more extra trips for additional equipment needed to access, locate, operate the valve, and record for maintenance and reporting. The Standard LX Skid platform can be fitted with the optional Wachs TM-7 HD Plus valve exerciser developing 2,500 ft/lbs of torque for larger or stubborn valves. -
Wachs Hydro-Vac Skid, Diesel includes all components pre-assembled to a steel "skid" that can be quickly bolted down to your flatbed truck. This unit is powered by a Tier 4F compliant, Kubota 1.1L, I-3 4-stroke, liquid cooled, IDI diesel engine that provides ample power for all contained functions. Built off Wachs Standard Builder Skid platform, it can be configured just the way you want it, built exactly to fit your needs and budget. Its future upgrade path means you can order what you need today, knowing that you can upgrade it tomorrow. The Standard Builder allows for an ala carte selection of our standard valve maintenance modules to be installed onto our heavy duty steel skid. The Builder platform’s upgrade path offers maximum versatility – for example, configure a Hydro-Vac trailer with hydraulics today, add a ERV-750 Valve Exerciser later. Wachs skid systems pre-install and pre-wire all the system components to a metal skid, ready to run, which only requires a few bolts to mount it to the truck flatbed, eliminating much of the labor expense. The skid that the equipment mounts to consists of 3” tall formed and welded frame with integrated 8” full length fork slot tubes. A step up in power, capacity and size from the smaller Trav-L-Vac 300, the Hydro-Vac Skid includes a powerful vacuum that generates 500 CFM at 11in Hg. It includes a large, 250 gallon spoils tank that features our exclusive hydraulic powered slide, tilt, and dump system with power latching door, here in a rear dump configuration. This power spoils tank features a twin cylinder, electric over hydraulic dump system that incorporates a slide and tilt system that moves the tank out before tilting to clear for dumping, then lifts to 55 degrees to discharge debris. Also driven from the common power train is a 2.5 gpm @ 3000 psi pressure washer system with 3 gallon anti-freeze tank and 95 gallon vertical water tank. Includes 2-1/2in, 1-1/4in & 7/8” suction wands, short & long wash-down guns, 20ft suction hose and 50ft retractable hose reel. Note a valve exerciser is not included with the Hydro-Vac Skid, it features vacuum, power spoils tank and power wash units only. Valve exercisers can be ordered separately, or refer to our Standard LX Skid, Diesel systems that includes the ERV-750 exerciser for fuller valve maintenance capabilities. -
Advanced Tablet Controller with VITALS Replacement for Wachs HC-100 Handheld Controller Wachs Utility Products TC-100 is a new way of controlling your valve maintenance systems, offering the same portability as our previous handheld but built on a new, more powerful architecture. Featuring the latest version of VITALS Mobile TC Software running on Windows 10 IoT, it offers enhanced compatibility with your desktop system. Meeting IP68 and MIL-STD-810G ratings, its rugged ergonomic design and long battery life means it’s able to handle a long day on the job in the harshest environments. Wachs TC-100 features a Quad-core Pentium N4200 processor for faster operation, and increased storage capacity for future upgradeability. Standard with 8GB ram memory and 128GB flash storage, it offers additional removable storage via a Micro SDXC card slot. Wachs TC-100 utilizes Microsoft’s Windows 10 IoT operating system, designed to handle larger files and detailed maps. Wachs TC-100 dust and water resistant ergonomic enclosure includes a sunlight-readable display, and a 43.2 Watt-hour battery will power you through the day. Should it run low, the included AC and vehicle chargers allow you to top off anywhere. Designed and assembled in the United States, the TC-100 offers superior build quality and secure data protection. The TC-100 is supported by Wachs Utility Products US based customer service, and includes a full one-year warranty against manufacturer defects, with a three year plan optionally available. Wachs TC-100 is sold in kit form as part number 79-422-05, and includes the TC-100 controller with battery, hand strap, standard stylus and tether, wet conditions stylus and tether, AC wall charger, TC 100 vehicle charger, and Wachs control cable assembly. -
Wachs Valve Box Buddy is a light-weight, magnetic lifter designed for easy removal of cast iron utility and steel valve box covers. It instantly attaches to the steel cover, utilizing a 70mm 1,000lb (450 kg) switchable magnet. It includes an easy to use on/off locking handle for safety, makes removing covers quick and easy. The powerful magnetic field penetrates textured surfaces, and allows the operator to ergonomically lift and move covers without bending over, minimizing the risk of back injuries. Rated for cast iron or steel covers up to 60 lbs.- No need to bend over and pick up heavy objects, helps to minimize back injuries
- Instantly attaches to and removes valve box covers, saving time
- Safety lock keeps magnets energized until they’re turned off
- Easy on/off control for precise positioning
- Lightweight and compact
- Ideal for picking up hot, sharp or dirty steel without contact
- Highly portable with self contained power supply
- Ideal for any size city, municipality or utility
-
Wachs Utility Products Standard LX Skid ranks among our bestselling products, excelling at all the functions typically associated with a municipality or water district self-performing a valve maintenance program. It brings the same benefits as our Standard LX trailer to your organization in a different platform, with all components preinstalled and prewired to a steel skid, ready to simply bolt down to your flatbed truck. Wachs Standard LX skid includes our class leading ERV-750 extended reach operator with a reach of 13 feet (3.96 meters) and offering a powerful 750 ft/lbs. of torque. This is the industry “standard” for a completely upgradeable, versatile platform designed to transport all the valve maintenance and vacuum tools needed in the field. Built to withstand the rigors of years of service, it’s the perfect solution for municipalities or contractors looking for a rugged, long lasting self-contained system. Wachs Standard LX skid supports our industry exclusive VITALS software that uses “No Assumptions” logic in its programming. This class leading software, developed over the last three decades, has one goal in mind - to eliminate misdirection and over-torquing of valves during operation to prevent damaging or breaking them. Comprised of both mobile and desktop modules, VITALS allows you to set torque limits and record infrastructure details including location, valve-operating direction, and torque applied. Wachs Standard LX Skid VMS, Gas comes complete with a wireless handheld controller with datalogger, and is powered by a powerful Kohler 27 HP gasoline engine. Standard equipment includes a powerful 500 CFM-11in Hg vacuum, a 250 gal spoils tank utilizing Wachs exclusive hydraulic slide, tilt & rear discharge, and a power latching rear door. Also standard is a 2.5 GPM@3000 psi pressure washer system with an 80 gallon water tank, and a HPU (Hydraulic Power Unit) with a HTMA Class II circuit, 10 gal reservoir, and a fan cooled heat exchanger, producing up to 8 gpm @ 2000 psi. Loaded with storage and accessories, Standard LX Skid includes the tools required for sophisticated valve maintenance programs. No more extra trips for additional equipment needed to access, locate, operate the valve, and record for maintenance and reporting. The Standard LX Skid platform can be fitted with the optional Wachs TM-7 HD Plus valve exerciser developing 2,500 ft/lbs of torque for larger or stubborn valves. -
Wachs Hydro-Vac Skid, Gas includes all components pre-assembled to a steel "skid" that can be quickly bolted down to your flatbed truck. This unit is powered by a 27 HP gasoline powered Kohler overhead cam air cooled engine provides ample power for all contained functions. Built off Wachs Standard Builder Skid platform, it can be configured just the way you want it, built exactly to fit your needs and budget. Its future upgrade path means you can order what you need today, knowing that you can upgrade it tomorrow. The Standard Builder allows for an ala carte selection of our standard valve maintenance modules to be installed onto our heavy duty steel skid. The Builder platform’s upgrade path offers maximum versatility – for example, configure a Hydro-Vac trailer with hydraulics today, add a ERV-750 Valve Exerciser later. Wachs skid systems pre-install and pre-wire all the system components to a metal skid, ready to run, which only requires a few bolts to mount it to the truck flatbed, eliminating much of the labor expense. The skid that the equipment mounts to consists of 3” tall formed and welded frame with integrated 8” full length fork slot tubes. A positive displacement blower provides 500 CFM-11in Hg vacuum, with spoils contained by a 250 gallon tank utilizing our exclusive hydraulic side and dump system and latching rear door. Also driven from the common power train is a 2.5 gpm @ 3000 psi pressure washer system with 3 gallon anti-freeze tank and 80 gallon vertical water tank. Includes 2-1/2in, 1-1/4in & 7/8” suction wands, short & long wash-down guns, 20ft suction hose and 50ft retractable hose reel. Note a valve exerciser is not included with this unit. Valve exercisers can be ordered separately, or refer to our Standard LX Valve Maintenance Skid, Gas, that includes the ERV-750 exerciser.
Our team is ready to help you learn more about the top-quality equipment sales, service, and parts we provide.
GET IN
TOUCH
EVENTS
Midwest Water & Wastewater Operator Expo
Feb 7 & 8th @ Kalahari Wisconsin Dells
WWETT
We will have a demo truck in the Rapidview IBAK North America Booth 5009 Feb 20-23 2023
19750 W Edgewood Drive
Lannon WI 53046
Phone: 1-800-381-9134