Features:
- Filters to dry and clean particulates from air supply
- Compact size with light weight contruction
- Air regulator controls damaging air pressure spikes
-
Compact style Air Treatment Module designed to safeguard your investment in pnuematic powered tools. Includes filter and regulator components designed to dry and filter particulates, and an air regulator to control air pressure spikes. Recommended for all air motors with integrated lubrication, use Air Treatment Standard Module 26-407-00 for air motors without integrated lubrication. -
As the industry leader in valve maintenance systems, Wachs Utility Products offers a wide range of equipment designed to perform recommended or mandated procedures. A great starring point in an affordable valve maintenance program is Wachs Compact LX Trailer. This trailer includes the basic building block of a valve maintenance program, our class leading ERV-750 extended reach operator with a reach of 13 feet (3.96 meters) and a powerful 750 Ft/lbs. of torque. Built to withstand the rigors of years of service, it is ideal for municipalities or contractors looking for an affordable, transportable and long lasting valve exercising trailer. Designed to carry our powerful ERV-750 (Extended Reach Valve) exerciser and Class II Hydraulic Power Unit, E.H. Wachs Compact LX is built to perform valve exercising where there is no need for vacuum excavation or power washout. It’s the perfect platform for your ERV-750 when you prefer a light trailer mount solution. The complete trailer weighs less than 1400 lbs (635 kg), is only 63in wide (1600mm) and 105in long (2670mm) and is easily pulled with light duty vehicles. With its small footprint the Compact LX is ideal for narrow city streets and tight alleys, for fragile or forested landscapes or anywhere a large, heavy trailer or truck won’t fit. Wachs Compact LX supports our industry exclusive VITALS software that uses “No Assumptions” logic in its programming. This class leading software, developed over the last three decades, has one goal in mind - to eliminate misdirection and over-torquing of valves during operation to prevent damaging or breaking them. Comprised of both mobile and desktop modules, VITALS allows you to set torque limits and record infrastructure details including location, valve-operating direction, and torque applied -
Wachs Compact VMS is our single turner Valve Maintenance Skid. Equipped with Wachs 750 Ft/lb (1020 Nm) Extended Reach Valve operator, telescoping valve key and Wachs ruggedized HC-100 with GPS controller/datalogger. The powerful engine (gas or diesel) with hydraulic pump provides ample power for all contained functions, including an auxiliary HTMA Class II circuit, 10 gallon (38 L) reservoir, fan cooled heat exchanger, continuous duty rated for 8 GPM (30.3 LPM) @ 1,800 PSI (125 bar) and steel storage bin. -
Wachs DW Guillotine® 208 Diamond Wire pipe saw is a faster and safer method of cutting 2 inch to 8 inch (DN50-200) pipe including steel, ductile, cast iron, concrete (CA), poly, PVC and mixed media. Secured to the pipe, the DWG 208 utilizes a fully enclosed, high speed diamond infused cutting wire that cuts quickly and precisely. Its compact design features stainless steel construction, with a collapsible, folding arm design that allows it to be easily stored and transported. Every DWG 208 saw comes complete with a custom carrier for protection, plus a carrier mounted water tank and spray lubricant. These saws do not bind like traditional saws, eliminating the kickback dangers associated with gasoline powered handheld chain saws or abrasive wheel devices that can occur from pipe compression or shifting. The DWG 208 is hydraulically powered using a sealed loop that can run in water, eliminating the danger of gas fumes collecting when working down in the ground. Apart from the cutting area, the diamond wire is fully enclosed within the saw for safety. The diamond wire is designed to slightly rotate radially while cutting, allowing all the diamond elements to come into contact with the workpiece. Due to the longevity of the diamond cutting wire Wachs DW series saws feature one of the lowest costs per cut in the industry, and a much lower cost of consumables over the life of the machine than other cutting devices. -
The big brother to Wachs DW Guillotine® 208 diamond wire saw, the DWG 416 is designed for cutting 4 inch to 16 inch (DN100-400) pipe including steel, ductile, cast iron, concrete (CA), poly, PVC and mixed media. The DWG 416 features exceptional build quality, with stainless steel and aluminum construction for corrosion resistance, and a collapsible, folding arm design that allows it to be easily transported and stored. Like all Wachs cutting solutions, the DWG 416 is secured to the pipe by a quick, secure chain mounting system, eliminating the danger of kickback accidents due to binding from pipe shifting or compression cuts. Hydraulically powered using a sealed loop, the DWG 416 can operate under the most extreme conditions, including full water immersion, and is ideal for cutting in restrictive spaces. The DWG series diamond wire is long lasting, giving the DWG 416 one of the lowest costs per cut in the industry. Like the smaller DWG 208, it utilizes a fully enclosed, high speed diamond infused cutting wire that rotates radially while cutting, allowing all the diamond elements to come into contact with the workpiece. Apart from the safety advantages, the lower cost of consumables over the life of the machine compared to handheld devices will offset its higher initial cost. Top mounted controls for wire speed and feed allow the operator to select the optimum settings for a quick, clean cut. -
Wachs ERV-750 Extended Reach Valve exerciser is named for the 750 ft/ lbs (1015 Nm) of torque it delivers, torque it can deliver even when fully extended. It gives the power you expect with the reach you need, with a rotating and extendable arm that reaches out to a full 13ft (3.96m). The ERV-750 pivots to reach to curbside valve boxes or hydrants. It uses dual hydraulic locking disc brakes with push button release that’s designed to hold the full torque force of the machine while operating. Built to last, the ERV-750 arm is constructed with a strong 3in square steel box section to resist twisting forces. Available as a standalone option, it’s the ideal valve exerciser for water organizations of all sizes. The ERV-750 High Stack version is designed for vehicle bumper mounting. It includes a mechanical lock to secure the exerciser during travel. -
Wachs ERV-750 Extended Reach Valve exerciser is the first choice of water system operators everywhere. The ERV-750 is named for the 750 ft/ lbs (1015 Nm) of torque it delivers, torque it can deliver even when fully extended. It gives the power you expect with the reach you need, with a rotating and extendable arm that reaches out to a full 13ft (3.96m). The ERV-750 pivots to reach to curbside valve boxes or hydrants. It uses dual hydraulic locking disc brakes with push button release that’s designed to hold the full torque force of the machine while operating. Built to last, the ERV-750 arm is constructed with a strong 3in square steel box section to resist twisting forces. Available as a standalone option, it’s the ideal valve exerciser for water organizations of all sizes. The ERV-750 Low Stack model is ideal for mounting to trailers, skids, and flatbed trucks. It includes a mechanical lock to secure the exerciser during travel. The ERV-750 Low Stack is standard equipment on our Compact LX, Standard LX and Grand LX Trailers and Standard LX Skid system. -
Capable of Submeter to Centimeter Level Positioning Accuracy
GPS kits to enhance the functionality of Wachs valve exercising and rehabilitation equipment by quickly locating assets and ensuring assessment is associated with correct valve record. Adding GPS capability automatically populates GPS fields in VITALS Software (when receiving a GPS signal). -
As the industry leader in truck and trailer valve maintenance systems, Wachs Utility Products offers a wide range of equipment designed to perform recommended or mandated procedures. Wachs products can help track your valuable water infrastructure and keep it operating at peak efficiency. The pinnacle in trailer mounted valve maintenance systems is Wachs Grand LX Trailer. Wachs Grand LX trailer includes two valve turning machines, our class leading ERV-750 extended reach operator and the newly upgraded TM-7 HD Plus, developing 2,500 ft/lbs of torque for larger or stubborn valves. It’s built on an extra heavy duty trailer with large section, fully boxed 6” frame rails, heavy duty fender, LED lighting, and a higher capacity 8400 lbs. rated axle with 12” electric brakes. The TM-7 HD Plus valve exerciser moves to the ideal nine o’clock mounting location in the driver’s line of sight, and allows for better torque management along the longitudinal axis of the tailer. Wachs Grand LX supports our industry exclusive VITALS software that uses “No Assumptions” logic in its programming. This class leading software, developed over the last three decades, has one goal in mind - to eliminate misdirection and over-torquing of valves during operation to prevent damaging or breaking them. Comprised of both mobile and desktop modules, VITALS allows you to set torque limits and record infrastructure details including location, valve-operating direction, and torque applied. -
As the industry leader in truck and trailer valve maintenance systems, Wachs Utility Products offers a wide range of equipment designed to perform recommended or mandated procedures. Wachs products can help track your valuable water infrastructure and keep it operating at peak efficiency. The pinnacle in trailer mounted valve maintenance systems is Wachs Grand LX Trailer. Wachs Grand LX trailer includes two valve turning machines, our class leading ERV-750 extended reach operator and the newly upgraded TM-7 HD Plus, developing 2,500 ft/lbs of torque for larger or stubborn valves. It’s built on an extra heavy duty trailer with large section, fully boxed 6” frame rails, heavy duty fender, LED lighting, and a higher capacity 8400 lbs. rated axle with 12” electric brakes. The TM-7 HD Plus valve exerciser moves to the ideal nine o’clock mounting location in the driver’s line of sight, and allows for better torque management along the longitudinal axis of the tailer. Wachs Grand LX supports our industry exclusive VITALS software that uses “No Assumptions” logic in its programming. This class leading software, developed over the last three decades, has one goal in mind - to eliminate misdirection and over-torquing of valves during operation to prevent damaging or breaking them. Comprised of both mobile and desktop modules, VITALS allows you to set torque limits and record infrastructure details including location, valve-operating direction, and torque applied.
-
Model D pneumatic drive reciprocating pipe saw designed to cut solids, multi-stranded casing strings and nested materials from 6in-18in (DN150-450 or 15cm-46cm) or up to 16in (DN400 or 41cm) on ductile pipe, with a choice of horizontal or vertical mounting. Includes:- air motor
- blade
- operating hand tools
- manual
-
Super C pneumatic drive reciprocating pipe saw designed to cut solids, multi-stranded casing strings and nested materials from 2in-12in (DN50-300 or 5cm-30cm) with choice of horizontal or vertical mounting. Includes:- blade
- storage case
- operating hand tools
- manual
-
Wachs Utility HPU-18 18HP Hydraulic Power Unit (HPU) is a CE Compliant, gas engine driven hydraulic unit cart mounted. Powered by an 18 HP (13.25 kW) Briggs & Stratton V-Twin engine with electric start, it is designed to power both HTMA Class I & II tools. A selector valve on the control panel sets the pump to deliver either 8 GPM (30 LPM) @ 2,000 PSI (140 bar) or 5 GPM (20 LPM) @ 2,000 PSI (140bar). Wachs portable hydraulic power units are the ideal choice for smooth, reliable hydraulic power, in the shop or in the field. Hydraulic power units (HPUs) pack more power in less space than any other power source, and because the supply is completely sealed they’re the best choice for partial immersion, sandy, dusty and other difficult environments. FEATURES- Fuel Tank capacity: 5.5 gallon (20 l). Minimum grade 85 octane
- One 5 gpm (19 lpm) Circuit or One 8 gpm (30 lpm) Circuit
- Hydraulic Reservoir Capacity 3 gallon (11 l)
- HTMA/EHTMA Category Type 1 and 2
- Max Pressure 2000 psi (138 bar)
- Auto idle feature-lower fuel consumption & less noise
- Tool circuit lockout during engine start-up - safety feature
- Quartz hour meter on control panel-records engine run time
- Lift and latch handle with fold up side handles
- 35 Ah sealed, non spillable, no maintenance battery located in covered compartment
- Electric start engine has pressure lubrication system, low engine oil shutdown & spin-on oil filter
- In-tank hydraulic filter with dipstick & easy access filter replacement
-
The Wachs HPU-750 is designed to supply hydraulic power to the ERV-750 and TM-7 valve operators, or any HTMA Class II hydraulic tool. Equipped with a Briggs & Stratton 16 HP Vanguard V-Twin OHV gasoline engine driven hydraulic power supply with dual auxiliary circuits, electric start and electric fan driven oil cooler. Rated for 8GPM @ 1800 PSI (30 LPM @ 124 BAR). The hydraulic system is self-contained with 10 gallon (38L) reservoir, filtration and relief valve. Ships without fluids, Part #79-405-00 -
The Wachs 45 pound hydraulic breaker is rugged, lightweight, and powerful. Designed for use with an HTMA class 2 hydraulic circuit, it is perfect for curb and sidewalk demolition and asphalt cutting. The foot design absorbs and controls tool-bit bounce, greatly reducing operator fatigue. Accessories:- 08-405-00 Trailer Mount for Breaker
- 08-410-01 5in x 11in Asphalt Cutter
- 08-410-02 14in Moil Point
- 08-410-03 3in x 14in Chisel
-
The Wachs Hydraulic Flow Adapter allows for smooth, quiet operation of any Diamond Wire Guillotine® Saw powered from other hydraulic equipment on the jobsite such as a skid loader or backhoe. Use with high-capacity power supplies up to 20 GPM (76 lpm) and up to 3,000 psi (172.5 bar). NOTE: 20 GPM rating is based on unrestricted tank return line; reducing or the use of quick disconnects on the inlet that reduces flow rating may risk damage to motor seals. -
45' x 1/2" hydraulic hose set with quick disconnects. -
Wachs Hydro-Vac Skid, Diesel includes all components pre-assembled to a steel "skid" that can be quickly bolted down to your flatbed truck. This unit is powered by a Tier 4F compliant, Kubota 1.1L, I-3 4-stroke, liquid cooled, IDI diesel engine that provides ample power for all contained functions. Built off Wachs Standard Builder Skid platform, it can be configured just the way you want it, built exactly to fit your needs and budget. Its future upgrade path means you can order what you need today, knowing that you can upgrade it tomorrow. The Standard Builder allows for an ala carte selection of our standard valve maintenance modules to be installed onto our heavy duty steel skid. The Builder platform’s upgrade path offers maximum versatility – for example, configure a Hydro-Vac trailer with hydraulics today, add a ERV-750 Valve Exerciser later. Wachs skid systems pre-install and pre-wire all the system components to a metal skid, ready to run, which only requires a few bolts to mount it to the truck flatbed, eliminating much of the labor expense. The skid that the equipment mounts to consists of 3” tall formed and welded frame with integrated 8” full length fork slot tubes. A step up in power, capacity and size from the smaller Trav-L-Vac 300, the Hydro-Vac Skid includes a powerful vacuum that generates 500 CFM at 11in Hg. It includes a large, 250 gallon spoils tank that features our exclusive hydraulic powered slide, tilt, and dump system with power latching door, here in a rear dump configuration. This power spoils tank features a twin cylinder, electric over hydraulic dump system that incorporates a slide and tilt system that moves the tank out before tilting to clear for dumping, then lifts to 55 degrees to discharge debris. Also driven from the common power train is a 2.5 gpm @ 3000 psi pressure washer system with 3 gallon anti-freeze tank and 95 gallon vertical water tank. Includes 2-1/2in, 1-1/4in & 7/8” suction wands, short & long wash-down guns, 20ft suction hose and 50ft retractable hose reel. Note a valve exerciser is not included with the Hydro-Vac Skid, it features vacuum, power spoils tank and power wash units only. Valve exercisers can be ordered separately, or refer to our Standard LX Skid, Diesel systems that includes the ERV-750 exerciser for fuller valve maintenance capabilities. -
Wachs Hydro-Vac Skid, Gas includes all components pre-assembled to a steel "skid" that can be quickly bolted down to your flatbed truck. This unit is powered by a 27 HP gasoline powered Kohler overhead cam air cooled engine provides ample power for all contained functions. Built off Wachs Standard Builder Skid platform, it can be configured just the way you want it, built exactly to fit your needs and budget. Its future upgrade path means you can order what you need today, knowing that you can upgrade it tomorrow. The Standard Builder allows for an ala carte selection of our standard valve maintenance modules to be installed onto our heavy duty steel skid. The Builder platform’s upgrade path offers maximum versatility – for example, configure a Hydro-Vac trailer with hydraulics today, add a ERV-750 Valve Exerciser later. Wachs skid systems pre-install and pre-wire all the system components to a metal skid, ready to run, which only requires a few bolts to mount it to the truck flatbed, eliminating much of the labor expense. The skid that the equipment mounts to consists of 3” tall formed and welded frame with integrated 8” full length fork slot tubes. A positive displacement blower provides 500 CFM-11in Hg vacuum, with spoils contained by a 250 gallon tank utilizing our exclusive hydraulic side and dump system and latching rear door. Also driven from the common power train is a 2.5 gpm @ 3000 psi pressure washer system with 3 gallon anti-freeze tank and 80 gallon vertical water tank. Includes 2-1/2in, 1-1/4in & 7/8” suction wands, short & long wash-down guns, 20ft suction hose and 50ft retractable hose reel. Note a valve exerciser is not included with this unit. Valve exercisers can be ordered separately, or refer to our Standard LX Valve Maintenance Skid, Gas, that includes the ERV-750 exerciser.
-
Wachs Hydro-Vac Trailer is a safe, non-destructive and cost-effective machine for precise utility excavation that requires less backfill and restoration. The Hydro-Vac trailer prevents underground damage, while offering a more accurate way to excavate soil and locate underground utilities. Powered by a long lasting Kubota 4 stoke diesel, the trailer comes with a Pintle hook for connection to a medium duty pickup or larger truck. Built off Wachs Standard Builder Trailer platform, it can be configured just the way you want it, built exactly to fit your needs and budget. Its future upgrade path means you can order what you need today, knowing that you can upgrade the trailer tomorrow. The Standard Builder allows for an ala carte selection of our standard valve maintenance modules to be installed onto our heavy duty trailer. The Builder platform’s upgrade path offers maximum versatility – for example, configure a Hydro-Vac trailer with hydraulics today, add a ERV-750 Valve Exerciser later. A step up in power, capacity and size from the smaller Trav-L-Vac 300, the Hydro-Vac trailer includes a powerful vacuum that generates 500 CFM at 11in Hg. It includes a large, 250 gallon spoils tank that features our exclusive hydraulic powered slide, tilt, and dump system with power latching door, here in a rear dump configuration. This power spoils tank features a twin cylinder, electric over hydraulic dump system that incorporates a slide and tilt system that moves the tank out before tilting to clear for dumping, then lifts to 55 degrees to discharge debris. Also driven from the common power train is a 2.5 gpm @ 3000 psi pressure washer system with 3 gallon anti-freeze tank and 95 gallon vertical water tank. Includes 2-1/2in, 1-1/4in & 7/8” suction wands, short & long wash-down guns, 20ft suction hose and 50ft retractable hose reel. Note a valve exerciser is not included with the Hydro-Vac trailer, it features vacuum, power spoils tank and power wash units only. Valve exercisers can be ordered separately, or refer to our diesel powered Standard LX Trailer that includes the ERV-750 exerciser for fuller valve maintenance capabilities. -
Wachs Hydro-Vac Trailer is a safe, non-destructive and cost-effective machine for precise utility excavation that requires less backfill and restoration. The Hydro-Vac trailer prevents underground damage, while offering a more accurate way to excavate soil and locate underground utilities. Powered by a powerful Kohler 27 HP gasoline engine, the trailer comes with a Pintle hook for connection to a medium duty pickup or larger truck. Built off Wachs Standard Builder Trailer platform, it can be configured just the way you want it, built exactly to fit your needs and budget. Its future upgrade path means you can order what you need today, knowing that you can upgrade the trailer tomorrow. The Standard Builder allows for an ala carte selection of our standard valve maintenance modules to be installed onto our heavy duty trailer. The Builder platform’s upgrade path offers maximum versatility – for example, configure a Hydro-Vac trailer with hydraulics today, add a ERV-750 Valve Exerciser later. A step up in power, capacity and size from the smaller Trav-L-Vac 300, the Hydro-Vac trailer includes a powerful vacuum that generates 500 CFM at 11in Hg. It includes a large, 250 gallon spoils tank that features our exclusive hydraulic powered slide, tilt, and dump system with power latching door, here in a rear dump configuration. This power spoils tank features a twin cylinder, electric over hydraulic dump system that incorporates a slide and tilt system that moves the tank out before tilting to clear for dumping, then lifts to 55 degrees to discharge debris. Also driven from the common power train is a 2.5 gpm @ 3000 psi pressure washer system with 3 gallon anti-freeze tank and 95 gallon vertical water tank. Includes 2-1/2in, 1-1/4in & 7/8” suction wands, short & long wash-down guns, 20ft suction hose and 50ft retractable hose reel. Note a valve exerciser is not included with the Hydro-Vac trailer, it features vacuum, power spoils tank and power wash units only. Valve exercisers can be ordered separately, or refer to our gas powered Standard LX Trailer that includes the ERV-750 exerciser for fuller valve maintenance capabilities.
-
he Wachs Pow-R-Drive 2 ("Power-Drive 2") or P-2 is a handheld valve turner/valve exerciser engineered for maintaining and operating critical valves. This portable and rugged workhorse is designed for daily use. Water utilities, municipal water services, and fire departments use the P-2 on valves and hydrants with standard operator nuts and non-rising-stem handwheels (with an optional adapter). Why Pow-R-Drive 2?- Easy to set up and operate, using a Pow-R-Drive is more productive than turning valves by hand with t-handles.
- The P-2 can prevent common injuries caused by hand-turning valves with a valve key wrench.
- The Pow-R-Drive 2 works hard, so the valve crew won't be worn out from opening and closing valves all day.
- It provides enough torque for stubborn valves, and your operator will be less likely to shear off a valve nut.
- They're ideal for hard-to-reach valves.
- Using a Pow-R-Drive 2 can save money and prevent damage in fast shut-off situations.
